Blackhawk XDS560 Trace System with USB560 JTAG Emulator

XDS560 Trace Emulator

Products

Quick Links

123 Gaither Drive
Mount Laurel, NJ 08054-1701
Phone: 1-877-983-4514
FAX: 1-856-866-1100

XDS560 Trace JTAG Emulator

The Blackhawk™ XDS560 Trace System (XDS560 Trace) is non-intrusive, hardware-based trace tool for debugging and profiling high-performance, DSP-based applications providing developers with advanced visibility to debug specialized problems that occur in high-performance, real-time embedded applications. This real-time visibility produces the detailed information needed to determine where complex and intermittent problems occur as well as the ability to analyze, profile, and tune applications for optimal performance.

The XDS560 Trace System is available in several configurations or as add-on to your existing Blackhawk XDS560-class emulator (contact Blackhawk to confirm compatibility) and see Ordering Information at the bottom of this page. Included in the kit are CCStudio v3.3 emulation drivers on CD ROM, all necessary power and interface cables, and documentation. A 60e-14t pin converter is also supplied for backwards compatibly to standard debugging of targets that do not have a 60-pin connector.

Data sheet (PDF) [ download ]

[ Large Image ]

Features

Non-intrusive high-speed data trace
Single, independently clocked input channel
Independently de-skew data pins on channel initialization
Up to 333 MHz data rate (167 MHz dual edge clock)
High-speed USB 2.0 (480 Mbit/sec) host port interface
Full integration with CCStudio Advanced Event Triggering (AET)
Real-time code and event profiling
Customizable output Trace display for post processing analysis

Benefits

Easier, more efficient development
Quickly track down extremely complex real-time bugs
Find and solve the invisible, most difficult, and intermittent bugs
Capture events leading up to system crashes or race conditions
Fine-tune algorithms and code performance for best performance
Integrated time stamping for a high degree of accuracy
Shorten time spent debugging complex, context-sensitive bugs
High cache visibility to fix pipeline stalls that would otherwise go unnoticed
Increases product quality and stability

Basic Requirements

TI trace-enabled DSP

The target DSP must support XDS560 trace. As of this product release, there are 17 TI catalog DSPs available that support the XDS560 Trace System. They are:

TMS320C6454 TMS320C6455 TMS320C6418 TMS320C6416T

TMS320C6416 TMS320C6415T TMS320C6415 TMS320C6414T

TMS320C6414 TMS320C6413 TMS320C6412 TMS320C6411

TMS320C6410 TMS320DM643 TMS320DM642 TMS320DM641

TMS320DM640

Visit the TI Web Site to this list or contact TI for information on their trace-enabled DSP device roadmap.

Target boards with trace-enabled DSPs that are available today include:

TMS320C6455 SRIO EVM

TMS320DM642 EVM

TMS320C6416T DSK.

60-pin, high-density target board connector

In addition to selecting a DSP that support XDS560 Trace you will need to populate your target board hardware with the correct connector that supports the high-speed interface. This is a high-density connector available from SAMTEC and it only requires about the same PCB area as the standard TI 14-pin JTAG header. So fitting it into your board layout should not be a problem.
It is STRONGLY recommended that this connector be used in place of, and not in addition to a 14-pin JTAG connector so that signal integrity remains high to support the high-speed XDS560 Trace interface. 60 to 14-pin adapters are available to support debugging from conventional JTAG emulators.

For more information on the new 60-pin connector and board layout considerations for these high-speed signals, please refer to the TI document, SPRU655.

The Blackhawk XDS560 Trace System is available from a world wide network of industry resellers. To find a reseller in your area, visit our where to buy page.

What's in the Box

Blackhawk XDS560-class JTAG Emulator (see ordering information)
5v Desktop Power Supply
US/UK/Euro Wall Cords
XDS560 Trace Pod
12v Desktop Power Supply
US/UK/Euro Wall Cords
6' USB Cable
60e_TI to 14t Pin Adapter
60e_TI to 60t Pin Saver
Installation CD
Quick Start Guide
Product Warranty Terms and Conditions

Ordering Information

Product: Blackhawk™ XDS560 Trace Cable without Emulator
Part No.: BH-CBL-XDS560T

Product: Blackhawk™ XDS560 Trace Cable with LAN560 JTAG Emulator
Part No.: BH-LAN-560T

Product: Blackhawk™ XDS560 Trace Cable with USB560 JTAG Emulator
Part No.: BH-USB-560T

Product: Blackhawk™ XDS560 Trace Cable with PCI560 JTAG Emulator
Part No.: BH-PCI-560T

Availability: Shipping since 1Q07