|
The Blackhawk USB2000 Controller is a small and lightweight controller designed
for the unique requirements of the Texas Instruments TMS320C2000 DSP developers.
Built upon the advanced technology of the highly-popular USB510, this 3rd generation
controller achieves the cost/performance balance required by the C2000 development
community. The compact controller pod requires no external power source. Power is
derived directly from the PC’s USB port.
The controller supports the standard 14-pin JTAG header and voltage ranges from
3.3 to 5.0v. The USB host port permits communications with the host PC and the bi-color
status LED gives visual indication of the controllers state.
A free add-on to the USB2000 Controller is the Blackhawk FlashBurn utility. This
scriptable utility follows the freely available Texas Instruments API and algorithms
for programming C2000 devices with on-chip flash. BHFlashBurn integrates seamlessly
with the Flash API allowing the ability to Clear, Erase and Program on-chip flash
on the target device.
Blackhawk also has available an optional Isolation Adapter
which protects from ground loop voltage, harsh environments and new, untested designs.
Supports 3.3-5.0v targets with TI 14-pin connections.
Blackhawk JTAG Emulators are available from a world wide network of
industry resellers.
|
- Super Low-Cost XDS510™-class Controller
- Plug n’ Play USB Host Interface.
- Bus powered, no external power required.
- Supports TI C2000 Digital Signal Processors:
- F283xF281xF280xF280xxLF240x
- 3.3/5.0 volt device I/O support.
- Bi-Color Status LED (red/green).
- Standard 14-pin JTAG Header Connector.
- Blackhawk FlashBurn utility add-on.
- Optional Isolation Adapter
available.
|
- Inexpensive Alternative
- Easy to Install
- Compact, simple and reliable
- Will not need to be replaced for updated DSPs
- Visual Indicator shows status continuously
-
Add-on's and Options for a small investment
|
- PC running Windows® 2000, XP or Vista
- 15 MB of free hard disk space
- Available USB port
- CD-ROM drive for driver installation
- 512 MB RAM
- Target board with TI-compatible Emulation JTAG header
|
Audio, Automotive, Broadband, Communications, Telecom, Computers & Peripherals,
Consumer Electronics, Industrial, Medical, Military, Security, Video and Imaging,
Wireless.
|
- USB2000 Controller
- 6' USB Cable
- Installation CD
- Quick Start Guide
- Product Warranty Terms and Conditions
|
Product: Blackhawk™ USB2000 Controller
Part No.: BH-USB-2000
TI DSP platforms: C2000 only
Compatible Operating Systems: Windows® 2000, XP and Vista
Availability: 1Q08
|